Installing Canon imageRunner 3570 drivers


Mac OSX systems

To use the Canon imageRUNNER 3570s, you will need to download a new PPD from Canon. You want the latest imageRUNNER PPD installer for the Mac OS X.
PLEASE NOTE: The Installable Options tab in step (11) will allow you to configure the printer if you used version 1.81 of the Mac OS X installer. If you used a later version, the Installable Options tab reveals nothing because these are configurable in the print dialog boxes.

The download file will uncompress to a folder called MacOSX.
Open this folder and run PPD Installer v1.81. This will install the Canon PPDs.

Now, to add a printer:

PRE-LEOPARD

  1. Start the Printer Setup Utility which is located in /Applications/Utilities
  2. Since you will need access to the Advanced Properties setup, you will have to do one of the following two things depending on your version of OS X:

  3. Make sure the drop down menu at the top says Advanced.
  4. For Device:, choose Internet Printing Protocol using IPP.
  5. For Device Name:, type the name of the print queue (e.g., ps3 or ps4).
  6. For Device URI:, type in ipp://printer.cs.umd.edu/printers/printqueue where printqueue is either ps3 or ps4.
  7. For Printer Model: choose Canon from the pop-up menu.
  8. For Name (ppd), choose Canon iR3570/iR4570.
  9. Click the Add button. This will add the printer to your printer list.
  10. To configure the printer, click on the Show Info icon.
  11. Choose Installable Options from the pop-up menu.
  12. Check the Side Paper Deck option box, and choose Finisher S1 for the Output Options.
  13. Click the Apply Changes box. You have finished setting up the printer.
LEOPARD
  1. Open up the System Preferences and choose Print and Fax from the Hardware section.

  2. Click the "+" on the left hand side to add a new printer.

  3. Under the Protocol drop down menu, choose Internet Printing Protocol - IPP.

  4. For the Address: option, type printer.cs.umd.edu.
  5. For the Queue: option, type printers/ps3 or printers/ps4.
  6. For the Name: option, you can replace printer.cs.umd.edu with the queue name.
  7. For the Print Using: option, choose Select a driver to use.
  8. From the list of drivers, select the Cannon iR3570/ir4570 option and click on the Add button.
  9. The Installable Options window should appear. Click on the box for the Side Paper Deck. For the Output Options: choose Finisher S1 and press the Continue button.


  10. Your printer has been added.