# File: xorg.conf
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
# **********************************************************************
# DRI Section
~~# **********************************************************************
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# === ATI device section ===
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
### EOF ###

Section "ServerLayout"

# The Identifier line must be present
	Identifier     "Default Layout"
	Screen         "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Synaptics" "AlwaysCore"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 
#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path.  The default path is shown here.
#    ModulePath "/usr/X11R6/lib/modules"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the Type1 and FreeType font modules
	Load  "dbe"  	# Double buffer extension
	SubSection "extmod"
		Option	    "omit xfree86-dga"   # don't initialise the DGA extension
	EndSubSection
	Load  "type1"
	Load  "freetype"
# This loads the GLX module
	Load  "glx"   # libglx.a
	Load  "extmod"
	Load  "fbdevhw"
	Load  "record"
	Load  "synaptics"
	Load  "dri"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
	Identifier  "Synaptics"
	Driver      "synaptics"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "auto-dev"
	Option	    "AccelFactor" "0.0050"
	Option	    "BottomEdge" "4500"
#  Option       "Edges" "1900 5400 1800 3900"
	Option	    "Emulate3Buttons" "on"
	Option	    "Finger" "25 30"
	Option	    "FingerHigh" "30"
	Option	    "FingerLow" "25"
	Option	    "InputFashion" "Mouse"
	Option	    "LeftEdge" "1900"
	Option	    "MaxSpeed" "0.18"
	Option	    "MaxTapMove" "220"
	Option	    "MaxTapTime" "180"
	Option	    "MinSpeed" "0.02"
	Option	    "Name" "Synaptics;Touchpad"
	Option	    "RightEdge" "5400"
	Option	    "SHMConfig" "on"
	Option	    "TopEdge" "1900"
	Option	    "VertScrollDelta" "100"
	Option	    "ZAxisMapping" "4 5"
	Option	    "TapButton2" "1"
	Option	    "CircularScrolling" "1"
	Option	    "CircScrollTrigger" "2"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
#	HorizSync    31.5 - 37.9
#	VertRefresh  50.0 - 70.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
#	HorizSync    31.5 - 37.9
#	VertRefresh  50.0 - 70.0
	Option	    "DPMS"
EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset     "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.
#    BusID       "PCI:0:10:0"
#    VideoRam    256
#    Clocks      25.2 28.3
	Identifier  "Standard VGA"
	Driver      "vga"
	VendorName  "Unknown"
	BoardName   "Unknown"
EndSection

Section "Device"

# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
	Identifier  "ATI Graphics Adapter"
	Driver      "fglrx"
	Option	    "no_accel" "no"
	Option	    "no_dri" "no"
# === misc DRI settings ===
	Option	    "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
	Option	    "DesktopSetup" "0x00000100"
	Option	    "MonitorLayout" "LVDS, CRT"
	Option	    "IgnoreEDID" "off"
	Option	    "HSync2" "31.5 - 48.4"
	Option	    "VRefresh2" "50 - 70"
	Option	    "ScreenOverlap" "0"
# === TV-out Management ===
	Option	    "NoTV" "yes"
    Option "TVStandard"                 "NTSC-M"
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
	Option	    "GammaCorrectionI" "0x00000000"
	Option	    "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
	Option	    "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
	Option	    "VideoOverlay" "on"
# === OpenGL Overlay ===
	Option	    "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
	Option	    "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
	Option	    "PseudoColorVisuals" "off"
# === QBS Management ===
	Option	    "Stereo" "off"
	Option	    "StereoSyncEnable" "1"
# === FSAA Management ===
	Option	    "FSAAEnable" "no"
	Option	    "FSAAScale" "1"
	Option	    "FSAADisableGamma" "no"
	Option	    "FSAACustomizeMSPos" "no"
	Option	    "FSAAMSPosX0" "0.000000"
	Option	    "FSAAMSPosY0" "0.000000"
	Option	    "FSAAMSPosX1" "0.000000"
	Option	    "FSAAMSPosY1" "0.000000"
	Option	    "FSAAMSPosX2" "0.000000"
	Option	    "FSAAMSPosY2" "0.000000"
	Option	    "FSAAMSPosX3" "0.000000"
	Option	    "FSAAMSPosY3" "0.000000"
	Option	    "FSAAMSPosX4" "0.000000"
	Option	    "FSAAMSPosY4" "0.000000"
	Option	    "FSAAMSPosX5" "0.000000"
	Option	    "FSAAMSPosY5" "0.000000"
# === Misc Options ===
	Option	    "UseFastTLS" "0"
	Option	    "BlockSignalsOnLock" "on"
	Option	    "UseInternalAGPGART" "yes"
	Option	    "ForceGenericCPU" "no"
#    BusID "PCI:1:0:0"    # no device found at config time
EndSection

Section "Screen"

    #Option "backingstore"
	Identifier "Screen0"
	Device     "ATI Graphics Adapter"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
  # initial origin if mode is smaller than desktop
#        Virtual     1024 768
		Viewport   0 0
		Depth     24
		Modes    "1280x768" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"

# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
	Mode         0666
EndSection