(** * Lists: Working with Structured Data *) From LF Require Export Induction. Module NatList. (* ################################################################# *) (** * Pairs of Numbers *) (** In an [Inductive] type definition, each constructor can take any number of arguments -- none (as with [true] and [O]), one (as with [S]), or more than one (as with [nybble], and here): *) Inductive natprod : Type := | pair (n1 n2 : nat). (** This declaration can be read: "The one and only way to construct a pair of numbers is by applying the constructor [pair] to two arguments of type [nat]." *) Check (pair 3 5) : natprod. (** Functions for extracting the first and second components of a pair can then be defined by pattern matching. *) Definition fst (p : natprod) : nat := match p with | pair x y => x end. Definition snd (p : natprod) : nat := match p with | pair x y => y end. Compute (fst (pair 3 5)). (* ===> 3 *) (** Since pairs will be used heavily in what follows, it is nice to be able to write them with the standard mathematical notation [(x,y)] instead of [pair x y]. We can tell Coq to allow this with a [Notation] declaration. *) Notation "( x , y )" := (pair x y). (** The new notation can be used both in expressions and in pattern matches. *) Compute (fst (3,5)). Definition fst' (p : natprod) : nat := match p with | (x,y) => x end. Definition snd' (p : natprod) : nat := match p with | (x,y) => y end. Definition swap_pair (p : natprod) : natprod := match p with | (x,y) => (y,x) end. (** Note that pattern-matching on a pair (with parentheses: [(x, y)]) is not to be confused with the "multiple pattern" syntax (with no parentheses: [x, y]) that we have seen previously. The above examples illustrate pattern matching on a pair with elements [x] and [y], whereas, for example, the definition of [minus] in [Basics] performs pattern matching on the values [n] and [m]: Fixpoint minus (n m : nat) : nat := match n, m with | O , _ => O | S _ , O => n | S n', S m' => minus n' m' end. The distinction is minor, but it is worth knowing that they are not the same. For instance, the following definitions are ill-formed: (* Can't match on a pair with multiple patterns: *) Definition bad_fst (p : natprod) : nat := match p with | x, y => x end. (* Can't match on multiple values with pair patterns: *) Definition bad_minus (n m : nat) : nat := match n, m with | (O , _ ) => O | (S _ , O ) => n | (S n', S m') => bad_minus n' m' end. *) (** Now let's try to prove a few simple facts about pairs. If we state properties of pairs in a slightly peculiar way, we can sometimes complete their proofs with just reflexivity (and its built-in simplification): *) Theorem surjective_pairing' : forall (n m : nat), (n,m) = (fst (n,m), snd (n,m)). Proof. reflexivity. Qed. (** But just [reflexivity] is not enough if we state the lemma in the most natural way: *) Theorem surjective_pairing_stuck : forall (p : natprod), p = (fst p, snd p). Proof. simpl. (* Doesn't reduce anything! *) Abort. (** Instead, we need to expose the structure of [p] so that [simpl] can perform the pattern match in [fst] and [snd]. We can do this with [destruct]. *) Theorem surjective_pairing : forall (p : natprod), p = (fst p, snd p). Proof. intros p. destruct p as [n m]. simpl. reflexivity. Qed. (** Notice that, unlike its behavior with [nat]s, where it generates two subgoals, [destruct] generates just one subgoal here. That's because [natprod]s can only be constructed in one way. *) (** **** Exercise: 1 star, standard, optional (snd_fst_is_swap) *) Theorem snd_fst_is_swap : forall (p : natprod), (snd p, fst p) = swap_pair p. Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 1 star, standard, optional (fst_swap_is_snd) *) Theorem fst_swap_is_snd : forall (p : natprod), fst (swap_pair p) = snd p. Proof. (* FILL IN HERE *) Admitted. (** [] *) (* ################################################################# *) (** * Lists of Numbers *) (** Generalizing the definition of pairs, we can describe the type of _lists_ of numbers like this: "A list is either the empty list or else a pair of a number and another list." *) Inductive natlist : Type := | nil | cons (n : nat) (l : natlist). (** For example, here is a three-element list: *) Definition mylist := cons 1 (cons 2 (cons 3 nil)). (** As with pairs, it is more convenient to write lists in familiar programming notation. The following declarations allow us to use [::] as an infix [cons] operator and square brackets as an "outfix" notation for constructing lists. *) Notation "x :: l" := (cons x l) (at level 60, right associativity). Notation "[ ]" := nil. Notation "[ x ; .. ; y ]" := (cons x .. (cons y nil) ..). (** It is not necessary to understand the details of these declarations, but here is roughly what's going on in case you are interested. The "[right associativity]" annotation tells Coq how to parenthesize expressions involving multiple uses of [::] so that, for example, the next three declarations mean exactly the same thing: *) Definition mylist1 := 1 :: (2 :: (3 :: nil)). Definition mylist2 := 1 :: 2 :: 3 :: nil. Definition mylist3 := [1;2;3]. (** The "[at level 60]" part tells Coq how to parenthesize expressions that involve both [::] and some other infix operator. For example, since we defined [+] as infix notation for the [plus] function at level 50, Notation "x + y" := (plus x y) (at level 50, left associativity). the [+] operator will bind tighter than [::], so [1 + 2 :: [3]] will be parsed, as we'd expect, as [(1 + 2) :: [3]] rather than [1 + (2 :: [3])]. (Expressions like "[1 + 2 :: [3]]" can be a little confusing when you read them in a [.v] file. The inner brackets, around 3, indicate a list, but the outer brackets, which are invisible in the HTML rendering, are there to instruct the "coqdoc" tool that the bracketed part should be displayed as Coq code rather than running text.) The second and third [Notation] declarations above introduce the standard square-bracket notation for lists; the right-hand side of the third one illustrates Coq's syntax for declaring n-ary notations and translating them to nested sequences of binary constructors. *) (* ----------------------------------------------------------------- *) (** *** Repeat *) (** Next let's look at several functions for constructing and manipulating lists. First, the [repeat] function takes a number [n] and a [count] and returns a list of length [count] in which every element is [n]. *) Fixpoint repeat (n count : nat) : natlist := match count with | O => nil | S count' => n :: (repeat n count') end. (* ----------------------------------------------------------------- *) (** *** Length *) (** The [length] function calculates the length of a list. *) Fixpoint length (l:natlist) : nat := match l with | nil => O | h :: t => S (length t) end. (* ----------------------------------------------------------------- *) (** *** Append *) (** The [app] function concatenates (appends) two lists. *) Fixpoint app (l1 l2 : natlist) : natlist := match l1 with | nil => l2 | h :: t => h :: (app t l2) end. (** Since [app] will be used extensively, it is again convenient to have an infix operator for it. *) Notation "x ++ y" := (app x y) (right associativity, at level 60). Example test_app1: [1;2;3] ++ [4;5] = [1;2;3;4;5]. Proof. reflexivity. Qed. Example test_app2: nil ++ [4;5] = [4;5]. Proof. reflexivity. Qed. Example test_app3: [1;2;3] ++ nil = [1;2;3]. Proof. reflexivity. Qed. (* ----------------------------------------------------------------- *) (** *** Head and Tail *) (** Here are two smaller examples of programming with lists. The [hd] function returns the first element (the "head") of the list, while [tl] returns everything but the first element (the "tail"). Since the empty list has no first element, we pass a default value to be returned in that case. *) Definition hd (default : nat) (l : natlist) : nat := match l with | nil => default | h :: t => h end. Definition tl (l : natlist) : natlist := match l with | nil => nil | h :: t => t end. Example test_hd1: hd 0 [1;2;3] = 1. Proof. reflexivity. Qed. Example test_hd2: hd 0 [] = 0. Proof. reflexivity. Qed. Example test_tl: tl [1;2;3] = [2;3]. Proof. reflexivity. Qed. (* ----------------------------------------------------------------- *) (** *** Exercises *) (** **** Exercise: 2 stars, standard, optional (list_funs) Complete the definitions of [nonzeros], [oddmembers], and [countoddmembers] below. Have a look at the tests to understand what these functions should do. *) Fixpoint nonzeros (l:natlist) : natlist (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_nonzeros: nonzeros [0;1;0;2;3;0;0] = [1;2;3]. (* FILL IN HERE *) Admitted. Fixpoint oddmembers (l:natlist) : natlist (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_oddmembers: oddmembers [0;1;0;2;3;0;0] = [1;3]. (* FILL IN HERE *) Admitted. (** For [countoddmembers], we're giving you a header that uses keyword [Definition] instead of [Fixpoint]. The point of stating the question this way is to encourage you to implement the function by using already-defined functions, rather than writing your own recursive definition. *) Definition countoddmembers (l:natlist) : nat (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_countoddmembers1: countoddmembers [1;0;3;1;4;5] = 4. (* FILL IN HERE *) Admitted. Example test_countoddmembers2: countoddmembers [0;2;4] = 0. (* FILL IN HERE *) Admitted. Example test_countoddmembers3: countoddmembers nil = 0. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 3 stars, standard, optional (alternate) Complete the following definition of [alternate], which interleaves two lists into one, alternating between elements taken from the first list and elements from the second. See the tests below for more specific examples. Hint: there is an elegant way of writing [alternate] that fails to satisfy Coq's requirement that all [Fixpoint] definitions be _structurally recursing_, as mentioned in [Basics]. If you encounter that difficulty, consider pattern matching against both lists at the same time with the "multiple pattern" syntax we've seen before. *) Fixpoint alternate (l1 l2 : natlist) : natlist (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_alternate1: alternate [1;2;3] [4;5;6] = [1;4;2;5;3;6]. (* FILL IN HERE *) Admitted. Example test_alternate2: alternate [1] [4;5;6] = [1;4;5;6]. (* FILL IN HERE *) Admitted. Example test_alternate3: alternate [1;2;3] [4] = [1;4;2;3]. (* FILL IN HERE *) Admitted. Example test_alternate4: alternate [] [20;30] = [20;30]. (* FILL IN HERE *) Admitted. (** [] *) (* ----------------------------------------------------------------- *) (** *** Bags via Lists *) (** A [bag] (or [multiset]) is like a set, except that each element can appear multiple times rather than just once. One possible representation for a bag of numbers is as a list. *) Definition bag := natlist. (** **** Exercise: 3 stars, standard, optional (bag_functions) Complete the following definitions for the functions [count], [sum], [add], and [member] for bags. *) Fixpoint count (v : nat) (s : bag) : nat (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. (** All these proofs can be done just by [reflexivity]. *) Example test_count1: count 1 [1;2;3;1;4;1] = 3. (* FILL IN HERE *) Admitted. Example test_count2: count 6 [1;2;3;1;4;1] = 0. (* FILL IN HERE *) Admitted. (** Multiset [sum] is similar to set [union]: [sum a b] contains all the elements of [a] and of [b]. (Mathematicians usually define [union] on multisets a little bit differently -- using max instead of sum -- which is why we don't call this operation [union].) We've deliberately given you a header that does not give explicit names to the arguments. Implement [sum] with an already-defined function without changing the header. *) Definition sum : bag -> bag -> bag (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_sum1: count 1 (sum [1;2;3] [1;4;1]) = 3. (* FILL IN HERE *) Admitted. Definition add (v : nat) (s : bag) : bag (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_add1: count 1 (add 1 [1;4;1]) = 3. (* FILL IN HERE *) Admitted. Example test_add2: count 5 (add 1 [1;4;1]) = 0. (* FILL IN HERE *) Admitted. Fixpoint member (v : nat) (s : bag) : bool (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_member1: member 1 [1;4;1] = true. (* FILL IN HERE *) Admitted. Example test_member2: member 2 [1;4;1] = false. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 3 stars, standard, optional (bag_more_functions) Here are some more [bag] functions for you to practice with. *) (** When [remove_one] is applied to a bag without the number to remove, it should return the same bag unchanged. (This exercise is optional, but students following the advanced track will need to fill in the definition of [remove_one] for a later exercise.) *) Fixpoint remove_one (v : nat) (s : bag) : bag (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_remove_one1: count 5 (remove_one 5 [2;1;5;4;1]) = 0. (* FILL IN HERE *) Admitted. Example test_remove_one2: count 5 (remove_one 5 [2;1;4;1]) = 0. (* FILL IN HERE *) Admitted. Example test_remove_one3: count 4 (remove_one 5 [2;1;4;5;1;4]) = 2. (* FILL IN HERE *) Admitted. Example test_remove_one4: count 5 (remove_one 5 [2;1;5;4;5;1;4]) = 1. (* FILL IN HERE *) Admitted. Fixpoint remove_all (v:nat) (s:bag) : bag (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_remove_all1: count 5 (remove_all 5 [2;1;5;4;1]) = 0. (* FILL IN HERE *) Admitted. Example test_remove_all2: count 5 (remove_all 5 [2;1;4;1]) = 0. (* FILL IN HERE *) Admitted. Example test_remove_all3: count 4 (remove_all 5 [2;1;4;5;1;4]) = 2. (* FILL IN HERE *) Admitted. Example test_remove_all4: count 5 (remove_all 5 [2;1;5;4;5;1;4;5;1;4]) = 0. (* FILL IN HERE *) Admitted. Fixpoint included (s1 : bag) (s2 : bag) : bool (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_included1: included [1;2] [2;1;4;1] = true. (* FILL IN HERE *) Admitted. Example test_included2: included [1;2;2] [2;1;4;1] = false. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 2 stars, standard, especially useful (add_inc_count) Adding a value to a bag should increase the value's count by one. State this as a theorem and prove it in Coq. *) (* Theorem add_inc_count : ... Proof. ... Qed. *) (* Do not modify the following line: *) Definition manual_grade_for_add_inc_count : option (nat*string) := None. (** [] *) (* ################################################################# *) (** * Reasoning About Lists *) (** As with numbers, simple facts about list-processing functions can sometimes be proved entirely by simplification. For example, just the simplification performed by [reflexivity] is enough for this theorem... *) Theorem nil_app : forall l : natlist, [] ++ l = l. Proof. reflexivity. Qed. (** ...because the [[]] is substituted into the "scrutinee" (the expression whose value is being "scrutinized" by the match) in the definition of [app], allowing the match itself to be simplified. *) (** Also, as with numbers, it is sometimes helpful to perform case analysis on the possible shapes (empty or non-empty) of an unknown list. *) Theorem tl_length_pred : forall l:natlist, pred (length l) = length (tl l). Proof. intros l. destruct l as [| n l']. - (* l = nil *) reflexivity. - (* l = cons n l' *) reflexivity. Qed. (** Here, the [nil] case works because we've chosen to define [tl nil = nil]. Notice that the [as] annotation on the [destruct] tactic here introduces two names, [n] and [l'], corresponding to the fact that the [cons] constructor for lists takes two arguments (the head and tail of the list it is constructing). *) (** Usually, though, interesting theorems about lists require induction for their proofs. We'll see how to do this next. *) (** (Micro-Sermon: As we get deeper into this material, simply _reading_ proof scripts will not get you very far! It is important to step through the details of each one using Coq and think about what each step achieves. Otherwise it is more or less guaranteed that the exercises will make no sense when you get to them. 'Nuff said.) *) (* ================================================================= *) (** ** Induction on Lists *) (** Proofs by induction over datatypes like [natlist] are a little less familiar than standard natural number induction, but the idea is equally simple. Each [Inductive] declaration defines a set of data values that can be built up using the declared constructors. For example, a boolean can be either [true] or [false]; a number can be either [O] or [S] applied to another number; and a list can be either [nil] or [cons] applied to a number and a list. Moreover, applications of the declared constructors to one another are the _only_ possible shapes that elements of an inductively defined set can have. This last fact directly gives rise to a way of reasoning about inductively defined sets: a number is either [O] or else it is [S] applied to some _smaller_ number; a list is either [nil] or else it is [cons] applied to some number and some _smaller_ list; etc. So, if we have in mind some proposition [P] that mentions a list [l] and we want to argue that [P] holds for _all_ lists, we can reason as follows: - First, show that [P] is true of [l] when [l] is [nil]. - Then show that [P] is true of [l] when [l] is [cons n l'] for some number [n] and some smaller list [l'], assuming that [P] is true for [l']. Since larger lists can always be broken down into smaller ones, eventually reaching [nil], these two arguments together establish the truth of [P] for all lists [l]. Here's a concrete example: *) Theorem app_assoc : forall l1 l2 l3 : natlist, (l1 ++ l2) ++ l3 = l1 ++ (l2 ++ l3). Proof. intros l1 l2 l3. induction l1 as [| n l1' IHl1']. - (* l1 = nil *) reflexivity. - (* l1 = cons n l1' *) simpl. rewrite -> IHl1'. reflexivity. Qed. (** Notice that, as when doing induction on natural numbers, the [as...] clause provided to the [induction] tactic gives a name to the induction hypothesis corresponding to the smaller list [l1'] in the [cons] case. Once again, this Coq proof is not especially illuminating as a static document -- it is easy to see what's going on if you are reading the proof in an interactive Coq session and you can see the current goal and context at each point, but this state is not visible in the written-down parts of the Coq proof. So a natural-language proof -- one written for human readers -- will need to include more explicit signposts; in particular, it will help the reader stay oriented if we remind them exactly what the induction hypothesis is in the second case. *) (** For comparison, here is an informal proof of the same theorem. *) (** _Theorem_: For all lists [l1], [l2], and [l3], [(l1 ++ l2) ++ l3 = l1 ++ (l2 ++ l3)]. _Proof_: By induction on [l1]. - First, suppose [l1 = []]. We must show ([] ++ l2) ++ l3 = [] ++ (l2 ++ l3), which follows directly from the definition of [++]. - Next, suppose [l1 = n::l1'], with (l1' ++ l2) ++ l3 = l1' ++ (l2 ++ l3) (the induction hypothesis). We must show ((n :: l1') ++ l2) ++ l3 = (n :: l1') ++ (l2 ++ l3). By the definition of [++], this follows from n :: ((l1' ++ l2) ++ l3) = n :: (l1' ++ (l2 ++ l3)), which is immediate from the induction hypothesis. [] *) (* ----------------------------------------------------------------- *) (** *** Reversing a List *) (** For a slightly more involved example of inductive proof over lists, suppose we use [app] to define a list-reversing function [rev]: *) Fixpoint rev (l:natlist) : natlist := match l with | nil => nil | h :: t => rev t ++ [h] end. Example test_rev1: rev [1;2;3] = [3;2;1]. Proof. reflexivity. Qed. Example test_rev2: rev nil = nil. Proof. reflexivity. Qed. (** For something a bit more challenging than the proofs we've seen so far, let's prove that reversing a list does not change its length. Our first attempt gets stuck in the successor case... *) Theorem rev_length_firsttry : forall l : natlist, length (rev l) = length l. Proof. intros l. induction l as [| n l' IHl']. - (* l = nil *) reflexivity. - (* l = n :: l' *) (* This is the tricky case. Let's begin as usual by simplifying. *) simpl. (* Now we seem to be stuck: the goal is an equality involving [++], but we don't have any useful equations in either the immediate context or in the global environment! We can make a little progress by using the IH to rewrite the goal... *) rewrite <- IHl'. (* ... but now we can't go any further. *) Abort. (** So let's take the equation relating [++] and [length] that would have enabled us to make progress at the point where we got stuck and state it as a separate lemma. *) Theorem app_length : forall l1 l2 : natlist, length (l1 ++ l2) = (length l1) + (length l2). Proof. (* WORKED IN CLASS *) intros l1 l2. induction l1 as [| n l1' IHl1']. - (* l1 = nil *) reflexivity. - (* l1 = cons *) simpl. rewrite -> IHl1'. reflexivity. Qed. (** Note that, to make the lemma as general as possible, we quantify over _all_ [natlist]s, not just those that result from an application of [rev]. This should seem natural, because the truth of the goal clearly doesn't depend on the list having been reversed. Moreover, it is easier to prove the more general property. *) (** Now we can complete the original proof. *) Theorem rev_length : forall l : natlist, length (rev l) = length l. Proof. intros l. induction l as [| n l' IHl']. - (* l = nil *) reflexivity. - (* l = cons *) simpl. rewrite -> app_length. simpl. rewrite -> IHl'. rewrite add_comm. reflexivity. Qed. (** For comparison, here are informal proofs of these two theorems: _Theorem_: For all lists [l1] and [l2], [length (l1 ++ l2) = length l1 + length l2]. _Proof_: By induction on [l1]. - First, suppose [l1 = []]. We must show length ([] ++ l2) = length [] + length l2, which follows directly from the definitions of [length], [++], and [plus]. - Next, suppose [l1 = n::l1'], with length (l1' ++ l2) = length l1' + length l2. We must show length ((n::l1') ++ l2) = length (n::l1') + length l2. This follows directly from the definitions of [length] and [++] together with the induction hypothesis. [] *) (** _Theorem_: For all lists [l], [length (rev l) = length l]. _Proof_: By induction on [l]. - First, suppose [l = []]. We must show length (rev []) = length [], which follows directly from the definitions of [length] and [rev]. - Next, suppose [l = n::l'], with length (rev l') = length l'. We must show length (rev (n :: l')) = length (n :: l'). By the definition of [rev], this follows from length ((rev l') ++ [n]) = S (length l') which, by the previous lemma, is the same as length (rev l') + length [n] = S (length l'). This follows directly from the induction hypothesis and the definition of [length]. [] *) (** The style of these proofs is rather longwinded and pedantic. After reading a couple like this, we might find it easier to follow proofs that give fewer details (which we can easily work out in our own minds or on scratch paper if necessary) and just highlight the non-obvious steps. In this more compressed style, the above proof might look like this: *) (** _Theorem_: For all lists [l], [length (rev l) = length l]. _Proof_: First, observe that [length (l ++ [n]) = S (length l)] for any [l], by a straightforward induction on [l]. The main property again follows by induction on [l], using the observation together with the induction hypothesis in the case where [l = n'::l']. [] *) (** Which style is preferable in a given situation depends on the sophistication of the expected audience and how similar the proof at hand is to ones that they will already be familiar with. The more pedantic style is a good default for our present purposes. *) (* ================================================================= *) (** ** [Search] *) (** We've seen that proofs can make use of other theorems we've already proved, e.g., using [rewrite]. But in order to refer to a theorem, we need to know its name! Indeed, it is often hard even to remember what theorems have been proven, much less what they are called. Coq's [Search] command is quite helpful with this. Let's say you've forgotten the name of a theorem about [rev]. The command [Search rev] will cause Coq to display a list of all theorems involving [rev]. *) Search rev. (** Or say you've forgotten the name of the theorem showing that plus is commutative. You can use a pattern to search for all theorems involving the equality of two additions. *) Search (_ + _ = _ + _). (** You'll see a lot of results there, nearly all of them from the standard library. To restrict the results, you can search inside a particular module: *) Search (_ + _ = _ + _) inside Induction. (** You can also make the search more precise by using variables in the search pattern instead of wildcards: *) Search (?x + ?y = ?y + ?x). (** The question mark in front of the variable is needed to indicate that it is a variable in the search pattern, rather than a variable that is expected to be in scope currently. *) (** Keep [Search] in mind as you do the following exercises and throughout the rest of the book; it can save you a lot of time! Your IDE likely has its own functionality to help with searching. For example, in ProofGeneral, you can run [Search] with [C-c C-a C-a], and paste its response into your buffer with [C-c C-;]. *) (* ================================================================= *) (** ** List Exercises, Part 1 *) (** **** Exercise: 3 stars, standard, optional (list_exercises) More practice with lists: *) Theorem app_nil_r : forall l : natlist, l ++ [] = l. Proof. (* FILL IN HERE *) Admitted. Theorem rev_app_distr: forall l1 l2 : natlist, rev (l1 ++ l2) = rev l2 ++ rev l1. Proof. (* FILL IN HERE *) Admitted. (** An _involution_ is a function that is its own inverse. That is, applying the function twice yield the original input. *) Theorem rev_involutive : forall l : natlist, rev (rev l) = l. Proof. (* FILL IN HERE *) Admitted. (** There is a short solution to the next one. If you find yourself getting tangled up, step back and try to look for a simpler way. *) Theorem app_assoc4 : forall l1 l2 l3 l4 : natlist, l1 ++ (l2 ++ (l3 ++ l4)) = ((l1 ++ l2) ++ l3) ++ l4. Proof. (* FILL IN HERE *) Admitted. (** An exercise about your implementation of [nonzeros]: *) Lemma nonzeros_app : forall l1 l2 : natlist, nonzeros (l1 ++ l2) = (nonzeros l1) ++ (nonzeros l2). Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 2 stars, standard, optional (eqblist) Fill in the definition of [eqblist], which compares lists of numbers for equality. Prove that [eqblist l l] yields [true] for every list [l]. *) Fixpoint eqblist (l1 l2 : natlist) : bool (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_eqblist1 : (eqblist nil nil = true). (* FILL IN HERE *) Admitted. Example test_eqblist2 : eqblist [1;2;3] [1;2;3] = true. (* FILL IN HERE *) Admitted. Example test_eqblist3 : eqblist [1;2;3] [1;2;4] = false. (* FILL IN HERE *) Admitted. Theorem eqblist_refl : forall l:natlist, true = eqblist l l. Proof. (* FILL IN HERE *) Admitted. (** [] *) (* ================================================================= *) (** ** List Exercises, Part 2 *) (** Here are a couple of little theorems to prove about your definitions about bags above. *) (** **** Exercise: 1 star, standard, optional (count_member_nonzero) *) Theorem count_member_nonzero : forall (s : bag), 1 <=? (count 1 (1 :: s)) = true. Proof. (* FILL IN HERE *) Admitted. (** [] *) (** The following lemma about [leb] might help you in the next exercise (it will also be useful in later chapters). *) Theorem leb_n_Sn : forall n, n <=? (S n) = true. Proof. intros n. induction n as [| n' IHn']. - (* 0 *) simpl. reflexivity. - (* S n' *) simpl. rewrite IHn'. reflexivity. Qed. (** Before doing the next exercise, make sure you've filled in the definition of [remove_one] above. *) (** **** Exercise: 3 stars, standard, optional (remove_does_not_increase_count) *) Theorem remove_does_not_increase_count: forall (s : bag), (count 0 (remove_one 0 s)) <=? (count 0 s) = true. Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 3 stars, standard, optional (bag_count_sum) Write down an interesting theorem [bag_count_sum] about bags involving the functions [count] and [sum], and prove it using Coq. (You may find that the difficulty of the proof depends on how you defined [count]! Hint: If you defined [count] using [=?] you may find it useful to know that [destruct] works on arbitrary expressions, not just simple identifiers.) *) (* FILL IN HERE [] *) (** **** Exercise: 3 stars, standard, optional (involution_injective) *) (** Prove that every involution is injective. Involutions were defined above in [rev_involutive]. An _injective_ function is one-to-one: it maps distinct inputs to distinct outputs, without any collisions. *) Theorem involution_injective : forall (f : nat -> nat), (forall n : nat, n = f (f n)) -> (forall n1 n2 : nat, f n1 = f n2 -> n1 = n2). Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 2 stars, standard, optional (rev_injective) Prove that [rev] is injective. Do not prove this by induction -- that would be hard. Instead, re-use the same proof technique that you used for [involution_injective]. Do not try to use that exercise directly as a lemma: the types are not the same. *) Theorem rev_injective : forall (l1 l2 : natlist), rev l1 = rev l2 -> l1 = l2. Proof. (* FILL IN HERE *) Admitted. (** [] *) (* ################################################################# *) (** * Options *) (** Suppose we want to write a function that returns the [n]th element of some list. If we give it type [nat -> natlist -> nat], then we'll have to choose some number to return when the list is too short... *) Fixpoint nth_bad (l:natlist) (n:nat) : nat := match l with | nil => 42 | a :: l' => match n with | 0 => a | S n' => nth_bad l' n' end end. (** This solution is not so good: If [nth_bad] returns [42], we can't tell whether that value actually appears on the input without further processing. A better alternative is to change the return type of [nth_bad] to include an error value as a possible outcome. We call this type [natoption]. *) Inductive natoption : Type := | Some (n : nat) | None. (** We can then change the above definition of [nth_bad] to return [None] when the list is too short and [Some a] when the list has enough members and [a] appears at position [n]. We call this new function [nth_error] to indicate that it may result in an error. As we see here, constructors of inductive definitions can be capitalized. *) Fixpoint nth_error (l:natlist) (n:nat) : natoption := match l with | nil => None | a :: l' => match n with | O => Some a | S n' => nth_error l' n' end end. Example test_nth_error1 : nth_error [4;5;6;7] 0 = Some 4. Proof. reflexivity. Qed. Example test_nth_error2 : nth_error [4;5;6;7] 3 = Some 7. Proof. reflexivity. Qed. Example test_nth_error3 : nth_error [4;5;6;7] 9 = None. Proof. reflexivity. Qed. (** (In the HTML version, the boilerplate proofs of these examples are elided. Click on a box if you want to see one.) *) (** The function below pulls the [nat] out of a [natoption], returning a supplied default in the [None] case. *) Definition option_elim (d : nat) (o : natoption) : nat := match o with | Some n' => n' | None => d end. (** **** Exercise: 2 stars, standard, optional (hd_error) Using the same idea, fix the [hd] function from earlier so we don't have to pass a default element for the [nil] case. *) Definition hd_error (l : natlist) : natoption (* REPLACE THIS LINE WITH ":= _your_definition_ ." *). Admitted. Example test_hd_error1 : hd_error [] = None. (* FILL IN HERE *) Admitted. Example test_hd_error2 : hd_error [1] = Some 1. (* FILL IN HERE *) Admitted. Example test_hd_error3 : hd_error [5;6] = Some 5. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 1 star, standard, optional (option_elim_hd) This exercise relates your new [hd_error] to the old [hd]. *) Theorem option_elim_hd : forall (l:natlist) (default:nat), hd default l = option_elim default (hd_error l). Proof. (* FILL IN HERE *) Admitted. (** [] *) End NatList. (* ################################################################# *) (** * Partial Maps *) (** As a final illustration of how data structures can be defined in Coq, here is a simple _partial map_ data type, analogous to the map or dictionary data structures found in most programming languages. *) (** First, we define a new inductive datatype [id] to serve as the "keys" of our partial maps. *) Inductive id : Type := | Id (n : nat). (** Internally, an [id] is just a number. Introducing a separate type by wrapping each nat with the tag [Id] makes definitions more readable and gives us flexibility to change representations later if we want to. *) (** We'll also need an equality test for [id]s: *) Definition eqb_id (x1 x2 : id) := match x1, x2 with | Id n1, Id n2 => n1 =? n2 end. (** **** Exercise: 1 star, standard (eqb_id_refl) *) Theorem eqb_id_refl : forall x, eqb_id x x = true. Proof. (* FILL IN HERE *) Admitted. (** [] *) (** Now we define the type of partial maps: *) Module PartialMap. Export NatList. (* make the definitions from NatList available here *) Inductive partial_map : Type := | empty | record (i : id) (v : nat) (m : partial_map). (** This declaration can be read: "There are two ways to construct a [partial_map]: either using the constructor [empty] to represent an empty partial map, or applying the constructor [record] to a key, a value, and an existing [partial_map] to construct a [partial_map] with an additional key-to-value mapping." *) (** The [update] function overrides the entry for a given key in a partial map by shadowing it with a new one (or simply adds a new entry if the given key is not already present). *) Definition update (d : partial_map) (x : id) (value : nat) : partial_map := record x value d. (** Last, the [find] function searches a [partial_map] for a given key. It returns [None] if the key was not found and [Some val] if the key was associated with [val]. If the same key is mapped to multiple values, [find] will return the first one it encounters. *) Fixpoint find (x : id) (d : partial_map) : natoption := match d with | empty => None | record y v d' => if eqb_id x y then Some v else find x d' end. (** **** Exercise: 1 star, standard (update_eq) *) Theorem update_eq : forall (d : partial_map) (x : id) (v: nat), find x (update d x v) = Some v. Proof. (* FILL IN HERE *) Admitted. (** [] *) (** **** Exercise: 1 star, standard (update_neq) *) Theorem update_neq : forall (d : partial_map) (x y : id) (o: nat), eqb_id x y = false -> find x (update d y o) = find x d. Proof. (* FILL IN HERE *) Admitted. (** [] *) End PartialMap. (** **** Exercise: 2 stars, standard, optional (baz_num_elts) Consider the following inductive definition: *) Inductive baz : Type := | Baz1 (x : baz) | Baz2 (y : baz) (b : bool). (** How _many_ elements does the type [baz] have? (Explain in words, in a comment.) *) (* FILL IN HERE *) (** [] *) (* 2023-09-05 12:36 *)